RosaDrywall.com

This Taylor built home is a unique one of kind home that blends into its surroundings, finished with our Level 4.5 Smooth Wall

We are in the final stages of a beautifully designed contemporary custom home.

Below are some pictures of the Gypsum Wall and Ceiling board that was installed.

Smooth Wall finish pictures to follow.

Allen at One Sky Homes is doing an absolute fantastic job on his Cottle Ave project.  No expense is being spared towards his vision of energy independence.  We were honored to take part in such a ground breaking project.

Find out More at: http://www.siliconvalleyzeroenergyhome.com/

All the Best,

Rosa Drywall

Constructed Metal Stud Walls and Level 4 Smooth Wall Finish

Expedited Process 4 Days Start to Finish 80′ ln ft  Metal Frame, Hang & Finish

Rosa Drywall recycles all drywall waste.  We believe in reducing the impact on our environment for future generations.

Drywall Finishing Council

Download this PDF and hand it to your painter, or better yet Quiz him/her.

So the economy is tough; job loss, stocks plummeting, housing prices falling……so on so on. As consumers, clients and vendors we are becoming much more money savvy.

So the drywall “Showdown” has evolved from Level 5 as the custom home standard to Level 4 being the choice of many.

WHY?

So the question now is can Rosa Drywall do Level 4, answer is yes of course!

So I start to ask, why would you like level 4 ?, because its cheaper.

We agree it is cheaper, however the final product is not the same as Level 5.

So we have developed a hybrid smooth wall system to be a Level 4.5 Smooth Wall. We believe the Level 4 just isn’t enough for the custom home market.

Our Manufactures do not recommend any type of gloss, enamel paints on Level 4. Custom homes are known for their distinct craftsmanship and design, a barrier against paint products does not sound like an optimal solution.

While our competitors are offering a budget minded Level 4, they are not producing the final product that our contractors and clients are desiring.

Contact Us to Find Out What We Do in our Hybrid Level 4.5 Smooth Wall

Let’s review the Levels of Gypsum Board Finish, paying close attention to the document changes:

Level 0
Level 0 is used in temporary construction or if final decoration is undetermined. No taping or finishing is required. Dust walls constructed in mall storefronts are an example of walls finished at level 0. There are no changes in Level 0.

Level 1
A Level 1 finish is recommended in areas that would generally be concealed from view or in areas that are not open to public traffic. In Level 1, “set” has replaced “embedded” so that the first sentence now reads, “All joints and interior angles shall have tape set in joint compound.” This was changed to clarify that tape need not be covered with joint compound to fulfill the requirements of Level 1. In Level 1, the surface is left free of excess joint compound. Ridges and tool marks are acceptable for a Level 1 finish. This level is often specified in the plenum area above ceilings, in attics, or in service corridors.

Level 2
In garages, warehouse storage areas and other similar areas where the final surface appearance is not of concern, a Level 2 finish is the recommendation. Level 2 may be specified where moisture resistant gypsum board is used as a tile substrate. Level 2 now reads, “All joints and interior angles shall have tape embedded in joint compound and wiped with a joint knife leaving a thin coating of joint compound over all joints and interior angles”. This change is to further differentiate Level 2 from Level 1. Joint compound is applied over all fastener heads and beads. The surface is left free of excess joint compound. Ridges and tool marks are acceptable for a Level 2 finish.

Additionally, Level 2 now includes the following sentence: “Joint compound applied over the body of the tape at the time of tape embedment shall be considered a separate coat of joint compound and shall satisfy the conditions of this level.” This sentence also appears in the ASTM C840 Appendix. In the past there has been some confusion as to whether tape pressed into joint compound and covered with joint compound in a single operation fulfilled the requirements of Level 1 or Level 2. This statement is intended to clarify the requirements of Level 2.

Level 3
In areas to be decorated with a medium or heavy texture or where heavy-grade wall coverings will become the final decoration, a Level 3 finish is recommended. Level 3 now states, “All joints and interior angles have tape embedded in joint compound and one additional coat of joint compound applied over all joints and interior angles. Fastener heads and accessories shall be covered with two separate coats of joint compound. All joint compound shall be smooth and free from tool marks and ridges.” Before final decoration it is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes. Level 3 is not recommended where smooth painted surfaces or light- to medium-weight wall coverings become the final decoration.

Level 4
If the final decoration is to be a flat paint, light texture or lightweight wall covering, a Level 4 finish is recommended. Level 4 has been modified to read, “All joints and interior angles have tape embedded in joint compound and two separate coats of joint compound applied over all flat joints and one separate coat of joint compound applied over interior angles. Fastener heads and accessories shall be covered with three separate coats of joint compound. All joint compound shall be smooth and free from tool marks and ridges.” Before final decoration it is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes. Gloss, semi-gloss and enamel paints are not recommended over a Level 4 finish.

Level 5
Level 5 finish is recommended for areas where severe lighting conditions exist and areas that are to receive gloss, semi-gloss, enamel or non-textured flat paints. Level 5 requires all the operations in Level 4. Additionally, a thin skim coat of joint compound, or material manufactured especially for this purpose, is applied to the entire surface. (This definition is referenced to Terminology, Section II, Page 2 of GA-214 to make the description of “skim coat” clear to all.) The surface is smooth and free from tool marks and ridges. Before final decoration it’s recommended that the prepared surface be coated with a primer prior to the application of final finishes. The Level 5 finish is required to achieve the highest degree of quality by providing a uniform surface and minimizing the possibility of joint photographing and/or fasteners “burning through” the final decoration.

It is important to consider that each level of finish as described in the recommendation is intended to stand alone. The levels are not intended to be cumulative. In other words, you do not add levels together to achieve the next higher level of finish.

Careful attention should be given to the “‘Note” following Levels 3, 4, and 5: “It is recommended that the prepared surface be coated with a “drywall primer” prior to the application of final paint. See painting specification in this regard.” This is an important step that should not be forgotten before final decoration. “Drywall primer” replaced the term “primer/sealer” throughout the revised document. The application of high quality, high solids drywall primer minimizes most decorating problems.

As defined in the recommendation, a drywall primer is a paint material specifically formulated to fill the pores and equalize the suction difference between gypsum board surface paper and the compound used on finished joints, angles, fastener heads and accessories, and over skim coatings.

Quoted: National Gypsum 2007, GA-214-07: “Recommended Levels of Gypsum Board Finish”

http://www.nationalgypsum.com/resources/techtalk/revisiting.aspx

Wall-Board Tools and other notable manufacturers offer wall patch kits for your do it yourself-er.

I decided to finally try this adhesive metal repair patch, on a service call, along with our favorite muds from West Pac Materials.

Yes, they are much more costly than gypsum wallboard material and some fiberglass tape, however the time savings on a small patch is incredible.

Also, a small patch does not have to multiply in size; while one looks for a stud or adds wood backing.

After two-three coats, depending on how well your day is going, your patch is done and ready for texture!